BCI NET 2

home *** CD-ROM | disk | FTP | other *** search

/ BCI NET 2 / BCI NET 2.iso / archives / telecomm / bbs / inetshell21.lha / help / FTP < prev next >

Wrap

Text File | 1995-01-05 | 35.1 KB | 961 lines

f1r1cf TOPIC:r0 c7FTP r1cfDESCRIPTION:r0 c7File Transfer Protocol (FTP) menuing system c2 THIS IS A LARGE FILE AND IS ADVISED YOU BUFFER THE INFORMATION The FTP menu system allows you to easily pick sites to FTP to. The menu system allows you to move from one directory to another and page from one to the next. It even allows you to pick from sites listed in your personal notebook database file (see document file labeled "NOTE"). c6 Commands listed on the FTP menu are: c5# c1Number of the menu item ccThis option allows you to pick from the available listing show to you on your screen. The listing can either be a subdirectory (ie MENU) or a site description. Entering the number of the site list will send you directly to the FTP client and attempt a connection to the site. c5P c1Move to previous page ccThis option only appears if there is a previous page of available to display. c5N c1Move to next page ccThis option only appears if there is another page ahead of the current page on the display. c5M c1Call up notebook entries ccThis option only appears if there are notebook entries in your notebook database file for FTP (See help file on NOTEBOOK). Choosing this option (if available) will pull up your entries from your FTP database and allow you to choose from the selected list. c5Q c1Quit and return to INetShell main menu ccThis option will return you to the INetShell main menu. c6 NcFTP Client Commands: c7 SYNOPSIS ncftp [program options] [[open options] hostname[:pathname]] DESCRIPTION NcFTP is a user interface to the Internet standard File Transfer Protocol. This program allows a user to transfer files to and from a remote network site, and offers addi- tional features that are not found in the standard inter- face, ftp. FEATURES Program options will be explained later in this document. Let's get down to business and go over the features that make this program worthwhile. Here is the list of section headers; I have my $MANPAGER environment variable set to use ``less -i'' so that I can skip to the section I want (otherwise, /regex commands to the pager won't match the section headers because of the formatting codes; the ``-i'' can search through the format- ting codes) Establishing the remote connection Format of the RC file The Recent-sites file Redialing a busy remote site Supplying a sitename from your shell's command line Using Colon-mode Using FTP-cat and FTP-more mode Supplying a port number with the open command Displaying and changing program variables Program variables Listing a remote directory Viewing a remote directory with your pager Redisplaying the last directory listing Fetching files from the remote host Viewing a remote file with your pager Creating a message file on the remote host Looking up site names and addresses Checking the configuration of the program Using the command shell Customizing the prompt Keeping a log of your file transfers Program options A sample RC file Establishing the remote connection Just opening a connection to a remote server was incon- venient enough in the stock ftp program to justify writing this program. Here at NCEMRSoft, we want to do our business as quickly and painlessly as possible. We'd rather save time and wear and tear on our metacarpals than bother typing entire site names, usernames, and email addresses masquerad- ing as passwords, and setting binary mode. We made all connections anonymous by default, and we automatically send our email address for the password on those connections. We allowed for site names to be abbrevi- ated. For each commonly accessed site, you can put an entry in your program preferences file (let's call it the ``ncftprc file'' or ``RC file'' for short). To open the site, from the command shell all you do is type: open wuarchive.wustl.edu or o wuarchive.wustl.edu As promised, you can abbreviate that further. Just use any abbreviation that would match only the site you had in mind. For the previous example, you could try: o wuarc o wustl o stl o wu Any of those abbreviations would open wuarchive.wustl.edu anonymously, sending your anon-password (usually set to your email address) as the password. Keep in mind that the pro- gram tries opening the first site that matches the abbrevia- tion you supplied. So: o w might match a site named bowser.nintendo.jp if that site appeared before your entry for wuarchive.wustl.edu. Most of the time we open remote sites anonymously, but there are times where you need to specifically open a site with an actual username and password. Let's say my partner, Phil Dietz, wants to FTP something out of my account. Perhaps he wants to fetch the latest version of the source code to NcFTP so he can optimize something or add a new feature behind my back. Since the program opens remote sites anonymously by default (actually, you can change this behavior; more on that later), he would have to specify a flag to the open command so he can supply my username and password. He would try: o -u sphygmomanometer.unl.edu or, more likely: o -u sph Then the program would prompt him for a username (login, whatever) and a password: Login Name (pdietz): mgleason Password: ******** If he got it right, he could raid my stuff. If not, he'd probably drop me an email asking me to quit changing my password so often. There are even times where you want to FTP from your own account, like if you are debugging an FTP client you wrote. At this prompt: Login Name (mgleason): I could just hit return to tell the program that I want ``mgleason'' as my username, then I would enter my password. Format of the RC file This release of the program is somewhat compatible with the stock _^f_^t_^p program's .netrc file. However, I can promise you that in the near future the program will use a new format, so don't invest too much time in it. The RC file can be named ``ncftprc'', ``netrc'', or ``.ncftprc'', but it is usually named ``.netrc'' so it can be used with the stock _^f_^t_^p program. NcFTP looks in the current working directory for any of those files, and then in your home directory, and after that it gives up (which is OK, because RC files aren't mandatory). The file usually starts with #set and #unset commands that do things to the programs variables. The reason for the ``#'' is so the stock ftp program will think they are com- ments. You might have this appearing as the first few lines in your RC file (I'll explain later): #set debug 1 #set pager "less -EMi" #unset startup-msg After those, you put in machine entries for each of your favorite sites. Let's put in an entry for wuarchive.wustl.edu. First you would put: machine wuarchive.wustl.edu Then you could put in your username, password, and account if you like: user anonymous password -mgleason@cse.unl.edu account wuarc.does.not.use.accounts Following that, you would add the startup macro that is run each time you connect to wuarchive. You must start it with this line: macdef init Then put in the commands you want to do: cd /graphics/gif ls -lt After that, you end the macro with a blank line (impor- tant!). The finished machine entry would look like the fol- lowing. To make the transition to the impending new format less painful, I recommend you adhere to this format: machine wuarchive.wustl.edu user anonymous password -mgleason@cse.unl.edu account wuarc.does.not.use.accounts macdef init cd /graphics/gif ls -lt (mandatory blank line to end the macro) Of course, if all you want to do is open wuarchive anonymously, you needn't bother with the ``user'', ``pass- word'', and ``account'' lines. You may want to put them in if you plan on using the stock ftp program, though. Try something like this: machine wuarchive.wustl.edu macdef init cd /graphics/gif ls -lt (mandatory blank line to end the macro) You can tell the program to not run the startup macro if you supply -i to the open command. Really, you should only bother adding entries for sites that you want to run startup macros upon connection. The next section explains why. The Recent-sites file Each time you open a site, the program saves the name of the site and the last directory you were in to the recent-sites file which is named .ncrecent and placed in your home direc- tory. The program saves a predetermined number of these sites in the file, and when it reaches the limit, it dis- cards the oldest entry so it can add a new one. You can just go ahead and use the name of the site you want with the open command if you know it is in the recent-file (and you can abbreviate the name, just like those in the RC file). But if you cannot remember what the name of the site you want, all you do is run the open command with no site parameter: open This will pop up a list of the sites in the recent-file, and sites in your RC file. At the open prompt, just type the name (or an abbreviation of that name) or the number preced- ing the site name to open that site. After opening the site you wanted, the program sets the remote working directory to the same one you left in the last time you called. If you don't like the idea of having the sites you called stored on disk, you can turn this feature off using an unset command, explained later. Redialing a busy remote site Some remote sites limit the number of leeches, er, anonymous connections at a time to reduce the load on the host com- puter. You can use the open command's redial feature to keep attempting connections until you get on, although that is not a very polite thing to do. The simplest way to do this would be to just supply the -r option: open -r wuarc There are also options you can use to tweak redial. The -d flag sets the delay between dials, and the -g flag sets a limit on how many dials should be attempting before giving up. If you don't supply -g the program will dial a day and forever (which my Number Theory professor, Dr. Mientka, says is longer than forever and a day) until it connects success- fully, or until you get sick of waiting and hit the inter- rupt key (usually ^C). This example dials wuarchive every ten minutes, giving up after twenty attempts. Note that the redial delay is speci- fied in seconds: open -r -d 600 -g 20 wuarc Please be considerate when you use redialing, so you won't tax the network. Site administrators can and do get angry when they get flooded with connections. Supplying a sitename from your shell's command line When you run the program: ncftp by itself does nothing and waits for you to type commands to the program's own shell. Just like the stock ftp program, you can supply a site name on the command line: ncftp wuarchive.wustl.edu You can also use abbreviations as usual: ncftp wuarc This is equivalent to running the program, then issuing an open command to open wuarchive. Using Colon-mode The open command is not a one-trick pony. Another option is what I call colon-mode. This feature is used (most of the time) from your shell's command line. In ancient times, way back during the Disco era, you could use a program called tftp to fetch a file using the Internet standard Trivial File Transfer Protocol. You could use that program to do something like this from within its shell: get wuarchive.wustl.edu:/graphics/gif/README and that would call wuarchive and fetch the README file. You can use this program to do the same thing from your shell's command line: csh> ncftp wuarchive.wustl.edu:/graphics/gif/README csh> head README This tells your shell, in this case the ``c-shell'' to run NcFTP, which would open wuarchive, fetch /graphics/gif/README and write the file ./README in the current working directory, and then exits. This is nice if you don't want to browse around the remote site, and you know exactly want you want. It would also come in handy in shell scripts, where you don't want to enter the command shell, and might not want the program to spew output. You can use colon-mode to set the starting remote working directory also: csh> ncftp wuarchive.wustl.edu:/graphics/gif This would run the program, open wuarchive, and cd to the gif directory, then run the program's command shell so you can browse. Colon-mode is also available from within the program's com- mand shell. At a prompt you can do stuff like this: ncftp> open wuarchive.wustl.edu:/graphics/gif/README ncftp> o wuarc:/graphics/gif Using FTP-cat and FTP-more mode There are times where you might not want the program to write a colon-mode file in the current working directory, or perhaps you want to pipe the output of a remote file into something else. Colon-mode has options to do this. It was inspired by the guy who wrote the ftpcat perl script. The -c option tells the program to write on the standard output stream. The -m option pipes the file into your pager (like more) Of course this won't work if the thing you give colon-mode is a directory! This example just dumps a remote file to stdout: csh> ncftp -c wuarc:/graphics/gif/README ... csh> This example redirects a remote file into a different loca- tion: csh> ncftp -c wu:/README > ~pdietz/thesis.tex This one shows how to use a pipeline: csh> ncftp -c wuarc:/README | tail | wc -l 10 csh> This shows how to page a remote file: csh> ncftp -m wuarc:/graphics/gif/README ... csh> Supplying a port number with the open command This option just didn't fit anywhere else, so to finish out the open command, -p lets you supply a port number if you have to ftp to a site using an nonstandard port number. Personally, I have yet to use feature, but its there for compatibility with the stock ftp program. Displaying and changing program variables Now I'll explain the commands unique to NcFTP. The others should perform the same as they would in the stock ftp pro- gram; consult the man page for it if you want those explained, or use the help command for a brief blurb. The show command is used to display program variables and their values. show all or show would display all the variables with their values. show var1 var2 ... varN would display each specified variable and its value. The set command changes the value of a program variable. Its syntax is: set varname value For Boolean or Integer variables, set varname would set the value of the variable varname to 1 (true). The unset command can be used to set the variable to its default value, or for Boolean and Integer variables, set the value of the variable to 0 (false). For String variables, you can use this to set the value to an empty string. You can use any of those three commands in both the command shell, or in the RC file with a ``#'' prepended. Program variables Each variable can be one of the following types: Boolean: Can be ``on'' or ``off'' (you can also use ``1'' or ''0''. Integer: Can be any positive or negative number, or 0. String: Is a string of characters. If the string needs to have a space in it, make sure you surround the whole string with double quotes in a set command. Variables follow. Some variables are explained later in the relevant sections. anon-open (Boolean) Tells whether the default login mode is anonymous if on, or if off, will prompt for a username/password. You can always override this by using either -a or -u with the open command. anon-password (String) Sends this as the password when you login anonymously. By default this is your email address. ansi-escapes (Boolean) If on, the program can use boldface, underline, and inverse text. auto-binary (Boolean) If on, sets the transfer type to binary mode immedi- ately after connection. debug (Integer) Sets the debugging level. gateway-login (String) Tells which username to use when logging in to your firewall gateway host. gateway-host (String) The site which is acting as your firewall gateway, or empty if you aren't using one. local-dir (String) The current local working directory. I like to set this from my RC file, so all my files go into my down- load directory. logfile (String) The name of your personal transfer log, or empty if you aren't using a transfer log. logsize (Integer) The maximum ceiling of your log file, before the pro- gram removes old entries. mprompt (Boolean) If on, prompts for each remote file expanded from a wildcard globbing expression. netrc (String, Read-only) Tells you the name of the RC file in use. pager (String) The pathname and flags of the program used to display output one screenful at a time. The default is the value of your $PAGER environment variable. prompt (String) The prompt specification that expands into the prompt. progress-reports (Integer) Which progress meter to use, or 0 if you don't want progress reports during file transfers. recent-list (Boolean) If on, uses and updates the recent-file. remote-is-unix (Boolean) Set automatically by the program upon connection, you may need to use this in a startup macro if the program guessed that a remote site was UNIX when it really is not. startup-msg (Boolean) If on, prints the opening message and tip. tips (Boolean) If on, prints a tip on how to use the program better each time you run the program. type (String) The name of the file transfer mode in use, such as ``binary'' or ``ascii''. verbose (String/Integer) Controls the amount of output spewed by the program. You can supply either the first character of the name of the verbosity level, or its number: Quiet (-1) Won't print any output at all, even if an error occurs. Errors Only (0) No output, except when errors occur. Terse (1) Prints errors, and useful output from the remote host. Verbose (2) Prints everything, even junk output from the remote end. Listing a remote directory The ls and dir commands perform in a similar manner to those of the stock ftp program. The ls command sends the FTP command ``NLST'' for you. This command has been set so that it defaults to always listing files in columns (this is the -C option given to the UNIX ls command) and appending metacharacters to each item name (this is the -F option), so you can see which items are directories, files, links, etcetera. If you don't want your items columnized, you can try using the -1 option with ls to print one item per line. The dir command sends the FTP command ``LIST'' for you, which instead of printing just item names, it prints item sizes, owners, dates, and permissions as well. This command is equivalent to ``ls -l'' on most remote systems. The usage for both commands is the same. Here is the one for ls: ls [-flags] [directory and file names] [redirection] Note that in this program, you can supply both flags and items to list in the same command. The stock version of ftp doesn't let you do this: ls -lrt /info-mac/help Another thing that the program does which the others should have done is let you supply more than one item: ls -lrt /info-mac/help /pub /info-mac/README You can also redirect the output into a file, or pipe it into something. This example shows how to list the contents of the current remote directory, and save the output into a file in the current local directory: ls -t >ls.out Note that for this to work, there must be no whitespace between the ``>'' and the filename, unlike your shell com- mand line which allows for extra whitespace. This will be (actually, is) fixed in a future version of the program. These examples show how to use a pipe: ls -t |tail dir -t "|less -CM" ls -t "|tail | wc" Like the redirection example, there must be no whitespace between the first pipe character and the rest of the stuff. The trick is that it has to appear as one argument to the commands. The second and third examples illustrate the use of double quotes to squeeze extra parameters in. The second example can be done without all that typing. See the descriptions of the pdir and pls commands below. Viewing a remote directory with your pager Didn't you hate it when you listed a remote directory, only to have most of the stuff scrolled off your terminal before you could read it? The pls and pdir commands take care of this for you. As you might have guessed, they perform exactly like their regular counterparts, only you view them with your pager. The pager to use is controlled by the pager program variable. Redisplaying the last directory listing The program saves the listing into a local buffer, so if you need to see it again (probably forgot about pdir) you can use the redir and predir commands for this. Fetching files from the remote host The get and mget retrieve remote files for you. The usage for get is: get remote-file [local-file or redirection] To fetch /pub/README and write it as a file named ./junk/readme, try: get /pub/README ./junk/readme To fetch /pub/README and write it as ./README, just do: get /pub/README This lets you fetch a file using its whole pathname, and write a copy of it in the current directory, without having to bother with typing a local filename. In the unlikely event that you have write permission to a directory called /pub on your local machine, it would write ``README'' in that directory. Most of the time the file you want will be in the current remote directory, so you can just do these: get README get README ./junk/readme You can also use a redirection for get, just like you can with the ls, dir, and redir commands. As described earlier, you have to conform to the format below for this release of the program: get README >/dev/null get README |head get README "|head -8" get README "|less -EMi" The last example is facilitated by the page command described later. The get command can also use a wildcard expression in an attempt to match exactly one remote file. I call it ``Poor Man's File Completion.'' If you've done a remote listing, and you decide you want to download a file by the name of ``obnoxiouslylongpackagename.tar.Z'', you can use ``PMFC'' to save some keystrokes. Choose an expression that will only match that one file, then use it with get: get obn*.Z a.tar.Z If your pattern was unique, get will fetch that file only. If the pattern matched more than one file, the program will bitch and moan. The mget command is used to fetch many files at a time. The difference between get and mget is that get lets you write only one file, but you can put it in a different directory, while mget fetches many files, always writing them in the current local directory. This example fetches several remote files at once: mget a.file.Z b.file.Z c.tar d.tar.Z The mget command, and its ugly sisters, mput and mdelete let you use wildcard expressions. I could have done the previ- ous example as: mget *.Z c.tar instead. The ``m'' commands will verify each file, if you have the program variable mprompt set. Viewing a remote file with your pager If you would like to read a file on the remote host without saving a copy of it on your machine, you can use the page (or more if you wish) command: page README page obn*README page README.Z The second example show that you can use ``PMFC'' like you can for get. The third example will work also, because if the program knows how to decompress the file, it will do so before feeding it to your pager. As stated earlier, you can change the program to use to page by setting the program variable pager. Creating a message file on the remote host Use the create an empty file on the remote site. Sometimes it is necessary to leave a note if you can't get in touch with the remote site's administrator. For example if a file is corrupted, you could try: create Foo.tar_is_corrupt in hopes that the original uploader will replace it. Looking up site names and addresses You can use the program's builtin mini-nslookup facility. If you wanted to know the site's IP number, but only knew the name you could do: lookup cse.unl.edu This would spit out IP number for that site, in this case ``129.93.1.12''. If you needed to know what a site's name was, but only knew the IP number, try: lookup 129.93.1.12 This would spit out the name for that site, in this case ``cse.unl.edu''. Checking the configuration of the program Use the version command to print version and compilation information about the program. This will also tell you which optional features are compiled into the program, such as logging to the system log and which command line editor (if any) has been installed. The author's email address is listed, and if you need to report something, send the output of this command along with your message. Using the command shell Just like the stock ftp program, you type commands to it until you get bored and hit either ^D or type the quit com- mand. The program supports links to popular command line editing libraries. If the person who compiled it went to the effort, you will be able to edit the command line with arrow keys and other editing commands, and also scroll up and down in the command line history, usually with the up and down arrows. You can check the version command to see if either ``GETLINE'' or ``READLINE'' are installed. Customizing the prompt You can set the shell's prompt string to whatever you like. You can use several metacharacters that expand into some- thing each prompt. The ``%'' flags are passed to strftime(3), so you can put the date or time in the prompt formatted as you like it: set prompt "%I:%M ncftp>" That would the current time in the prompt. The ``@'' flags are expanded by the program itself. Here's the list of them. If you have an ANSI-compatible terminal, or you have the program variable ansi-escapes set, you can use @B, @I, and @U to turn on boldface, inverse, and underline text respec- tively (otherwise they won't insert anything). You can also use @R to turn on inverse (reverse) text. @P sets the text back to plain text. @D Inserts the full path of the current remote directory. The @J flag is similar except it inserts only the directory name. @H Inserts the name of the remote host. @C inserts the host and current directory path in colon-mode format, such as ``cse.unl.edu:/pub/mgleason'', or ``(not connected)''. The @c flag is similar, only it will insert ``cse.unl.edu:/pub/mgleason'' and a newline if connected, otherwise it prints nothing. The default prompt uses this flag to print a two line prompt when connected and a one line prompt when not connected. @E or @! inserts the event number (how many commands you've typed). @M inserts ``(Mail) '' if mail has arrived since running the program. @N inserts a newline character. Keeping a log of your file transfers You can have the program keep a personal log file. I find it is useful so I can see where I got a certain file, or what the name of that site was I called two weeks ago. To use a log, add: #set logfile ~/.ftplog (or whatever you want to name the log) to your RC file. I don't want my log growing too large and using up all my disk space, so I also have: #set logsize 10240 in my RC file. If you set the limit on the maximum log size, the program will keep the log file at or below that size, discarding old entries. Note that this is different from having SYSLOG appear in the version command's output. When this is on, your actions are recorded to the system log, so your system administrator can make sure you aren't doing anything ``bad.'' Program options Remember that you can treat the command line like an open command, so all lowercase options are passed to the open command, and the uppercase options are handled by the main program. The uppercase options are described below; refer to the open command for descriptions of its options. -D x sets the debugging level to x. -H runs the version command and exits, so you can save the output of it to use when you need to mail me something. -I toggles the mprompt variable; this is provided for com- patibility with ``ftp -i''. -N disables reading of the RC file; this is provided for compatibility with ``ftp -n''. -V x sets verbosity to level x (-1, 0, 1, 2) or (quiet, errs, terse, verbose). See the description of the verbose program variable for more information. Here are some example command lines. Again, see the description of the open command (especially colon-mode and FTP-cat mode) and all its functions for more information. This just enters the NcFTP command shell: csh> ncftp This fetches CONTENTS and then quits: csh> ncftp cse.unl.edu:/pub/mgleason/CONTENTS Some others examples, with open options and main program options mixed in: csh> ncftp -V quiet -u ftp.unl.edu csh> ncftp -c cse.unl.edu:/pub/mgleason/CONTENTS csh> ncftp -D 2 -r -d 120 -g 10 -N ftp.unl.edu A sample RC file Here is a sample RC file: #set logfile ~/.ftplog #set progress-reports 2 #set local-dir /usr/tmp/zz #set prompt "@B@E @UNcFTP@P @B@M@D@P ->" machine sumex-aim.stanford.edu macdef init cd /info-mac get ./help/recent-files.txt "|grep -v '.abs' > sumex !less sumex pwd # This site is in here just so I can use ``apple'' # as an abbreviation. machine ftp.apple.com # NcFTP will only ask for your password: machine cse.unl.edu login mgleason # You can supply a login and a password: machine fake.machine.unl.edu login mgleason password mypass macdef init cd ./foo/bar # If an antiquated non-UNIX machine doesn't use # the "SYST" command, you may need to unset # remote-is-unix, if the remote host complains # about ``ls -CF''. machine some.vms.unl.edu macdef init unset remote-is-unix AUTHORS NcFTP was written by Mike Gleason, NCEMRSoft (mgleason@cse.unl.edu), and based on code by the authors of the ftp from the BSD 4.3 distribution. NcFTP is copyrighted 1992, 1993 by NCEMRSoft and 1985, 1989 by the Regents of California. Ideas and some code contributed by Phil Dietz, NCEMRSoft (pdietz@cse.unl.edu). Testing and debugging done by Phil and Kok Hon Yin (hkok@cse.unl.edu). Extensive man page formatting work by DaviD W. Sanderson (dws@ssec.wisc.edu). BUGS Correct execution of many commands depends upon proper behavior by the remote server. The remote server may drop the connection if you take a long time to page remote files. Termcap padding is not correctly displayed. There are no such sites named bowser.nintendo.jp or sphygmomanometer.unl.edu. u1cfOTHER COMMANDS AVAILABLE AT THIS PROMPTu0:c7 ARCHIE CONFIG DIR HELP IRC MAIN NOTE QUIT REDRAW TELNET PING VIEW